Car seat massage lumbar support

Car seat massage lumbar support

Adopting a sacro-lumbar joint support structure and utilizing the ISO 2631-1 vibration transmission rate optimization algorithm, we achieve: A 37% reduction in intervertebral disc pressure Lateral bending moment control < 18 Nm Dynamic back-tracking technology dynamically adjusts the support surface in real time to match the human body's respiratory rhythm of 0.1 Hz.

Keywords:

Car seat massage lumbar support

Category:

Car seat massage lumbar support

Product Inquiries:

86-15162533886 13822160387

Message
Related products

Product Description

Table of Dynamic Performance Parameters for the Air Pressure Lumbar Support System

Working Mode Adjust parameters Performance indicators Technological Value
Full Charge Mode Maximum support height 35 mm Provides strong lumbar support (compliant with SAE J289 standard)
Inflation Response Time 14 s Stable pressure state with no fluctuations (±0.5 kPa)
Full Release Mode Pressure Relief Response Time 12 s Zero-residue air pressure rapid reset
Top-up and bottom-down Upper Zone Support Height 31 mm Precisely matches the curvature of the T12-L1 vertebral body.
Mode switching time 7 s Fastest zone response at the same level
Charge from below, discharge from above Lower Zone Support Height 31 mm Optimize sacral pressure distribution
Mode switching time 8 s Millisecond-level solenoid valve control accuracy

 

 

The advantages of the seat lumbar support focus on

▪ Lumbar Spine Biomechanical Protection System

Adopting a sacro-lumbar joint support structure and utilizing the ISO 2631-1 vibration transmission rate optimization algorithm, we achieve:

Intervertebral disc pressure reduced by 37%

Lateral bending moment control < 18 Nm

Dynamic back-tracking technology dynamically adjusts the supporting surface in real time to match the human respiratory rhythm of 0.1 Hz.

▪ Anti-fatigue driving energy management

The integrated Active Pressure Cycling system runs automatically every 30 minutes.

The phase-change temperature-control material layer (PCM Layer) maintains the optimal muscle metabolic temperature of 32±2℃, extending comfortable driving duration by 2.3 times.

▪ High-stroke pneumatic actuation system

Breakthrough performance of single-air-bag module:

Support height ≥ 35mm (covering the lumbar lordosis range of adults from the 5th to 95th percentile)

Linear travel accuracy ±0.3mm (ISO 16840-3 Class A standard)

▪ Silent pneumatic servo technology

Innovative gas path control system:

‣14-second full-cycle inflation (at 23℃, compared to the industry average of 22 seconds)

Related products

Microrefrigerator

Microrefrigerator

Microcoolers, designed to meet the demands of harsh high-temperature environments and the trend toward miniaturization of devices, employ high-performance thermoelectric materials and advanced manufacturing processes. They feature compact size, high power density, and excellent reliability, making them suitable for a wide range of low-power cooling or heating applications.
Single-stage cooler

Single-stage cooler

Single-stage refrigerators are suitable for applications with high or very high cooling capacity requirements and high efficiency demands. Standard products can achieve an accuracy of up to ±0.025, and can be configured differently according to customer requirements.
Multi-stage cooler

Multi-stage cooler

Multi-stage refrigerators are specially designed for applications with large temperature differences, capable of generating temperature differences exceeding 100 K. Different stacked designs can meet varying cooling depth requirements. They are suitable for applications requiring moderate to small refrigeration capacities and deep cooling.
Alien cooler

Alien cooler

The unconventional refrigerators can be designed and manufactured to fully meet customers’ specific requirements in terms of appearance, dimensions, connection methods, and other technical specifications.
Temperature cycler

Temperature cycler

The temperature circulator is specially designed for applications involving cold-and-hot cycling. The product features a unique structural design and advanced manufacturing technology that significantly withstands the thermal stresses generated during cold-and-hot cycling cycles, ensuring a long service life.
Thermoelectric generator

Thermoelectric generator

When heat is supplied to the hot side of a thermoelectric device and a temperature difference is established between its hot and cold sides, a direct current will be generated.
Standard System AA/DA Series

Standard System AA/DA Series

The standard AA/DA series is a thermoelectric cooling assembly for air-to-air (AA model) or direct-to-air (DA model) applications.
Standard System LA/DL/LL Series

Standard System LA/DL/LL Series

The standard system LA/DA/LL series components are used to cool or heat the coolant flowing through a liquid heat exchanger. This heat exchanger is specifically designed for circulating cooling systems and requires a pump and associated piping to complete the liquid circuit.
Recirculating chiller

Recirculating chiller

By employing custom thermoelectric coolers equipped with advanced thermoelectric materials, it achieves a high coefficient of performance (COP) and low-noise operation. These coolers utilize compressor-based technology to cool temperatures far below ambient levels and effectively remove and dissipate heat from temperature-sensitive components in analytical instruments, medical devices, and industrial equipment.
Water-cooled heat exchanger

Water-cooled heat exchanger

The water-cooled heat exchangers (WL, LA, and WW series) are specifically designed for circulating water or ethylene glycol-water solutions (antifreeze), aiming to maintain the coolant temperature at a level that is either equal to or close to the ambient temperature.
Custom thermoelectric chips

Custom thermoelectric chips

▪ Cooling capacity ▪ Temperature difference range ▪ Dimensional specifications ▪ Surface treatment options ▪ Thermal cycling capability
Custom Thermoelectric Modules

Custom Thermoelectric Modules

For applications with unique properties or complex requirements, customized thermoelectric modules can provide more optimized thermal management solutions.

Product Inquiry

* Note: Please make sure to provide accurate information and keep communication smooth—we’ll get in touch with you as soon as possible!
Submit now